TOP 10 WAYS TO PAINT LIKE A PRO

Do what the experts do to get a professional job looking painters in upper hutt.
Remember: Stock and price could change after the publication date. We may also make money through these affiliate links.
These top tips will help you make your next painting job a success, no matter how many walls you have.

1. Do not wait for dry weather.

Avoid painting when it’s rainy because humidity can cause drips and slow drying. Take your time if you have to paint in humid conditions. Use slow drying paint to fix any mistakes before you move on to the next coat. Don’t do too much, or it will show once you’re done.

2. Perform a thorough visual inspection and prep.

Cracked, flaking, or peeling areas should be lightly sanded or rubbed (and then thoroughly rinsed) before you apply new primer or paint. The weight of the new paint will cause the old paint to come off. Tom Lee, Senior Vice President of Consumer Marketing at Behr, says that ignoring this issue will only lead to wasted time and money. You can also wash gritty spots with soap and rinse them with warm water. To ensure the paint sticks to a clean surface, use a damp cloth to wipe it down.

3. Purchase high-quality roller covers, brushes, and painter’s tape.

You don’t want your paint to be too expensive if you are spending a lot of money on it. Roller covers and brushes that provide excellent coverage are essential to ensure you don’t waste paint time or paint on reapplication. High-end painter’s tape is the best for sealing out drippings and blurred paint.

4. Know your nap.

Your walls will have more texture, so you need a thicker nap to cover your rollers. This will allow your roller cover to reach all crevices and provide complete coverage. If you are painting concrete walls, a thick nap is recommended. A thin nap is better for drywall. A thick nap can cause texture problems. Be sure to tell the salesperson what you intend to paint when you buy your supplies.

5. Protect everything you do not want painted.

It will be a great investment in time to cover floors, furniture, and hardware before starting a painting project. Drop cloths are essential. Small plastic sandwich bags with tape can be used to protect doorknobs.

6. Take off outlet and light switch covers.

You might be tempted to skip the five-minute step if you are impatient. But don’t.

7. Use primer.

If you have a smooth, clean surface, a paint-and-primer combination is fine. If the wall is in good condition or it has been eight years since your last painting, you should use a separate primer. You can use a bonding primer like benjamin moore’s inslx stix waterborne primer or kilz adhesion exterior bonding primer if you have to cover a difficult surface, such as glass or high-gloss painting.

8. Protect your paint by storing it.

Ask the paint sales person for a realistic estimate of how much paint you will need to buy all at once. Instead of mixing one gallon at once, mix all the paint in one container and then mix it thoroughly. This is called “boxing” your paint and keeps your color consistent from start to finish.

9. Let the roller do all the work.

Premium paints today flow easily, and you have already selected a quality roller cover. You don’t need to apply much pressure. Use an extension pole to reach the maximum area without straining your back.

10. Paint from top to bottom.

Once you have cut your ceiling and baseboard edges with a knife, use your roller to paint from the ceiling down. Pros paint over the mistakes of amateurs who often leave behind traces of paint drips and spatter at the end. It’sIt’s best not to touch an area that has dried. It can leave paint streaks and marks if you go back to it.