Tiles, whether on the wall or the floor, can upgrade the appearance of any room but only if the tiles are clean. Your home will appear grungy if they start to lose their shine and begin to look worn. This will happen over time. It’s vital to keep your tiles looking good by cleaning them regularly.
Cleaning scruffy tiles is a difficult task. Over time, stains can become difficult to remove, causing permanent damage and making your tiles appear dirty and tattered.
Also, there is confusion regarding the correct cleaning materials and methods. You may damage the tiles if you’re not careful.
7 Simple Ways To Maintain Your Floor And Wall Tiles In Top Condition.
Here are some simple but effective ways to restore the shine on your tiles.
Note: If you’re testing new cleaning agents or methods, test them on a small area first. Only proceed if there are no visible damages.
1. Cleaning regularly is essential.
You will save hours of cleaning if you spend just a few moments cleaning your tiles on a regular basis. You don’t need harsh chemicals for daily cleaning. You only need a mop, a bucket of warm water, and a broom. Daily sweeping and wiping of tiles will keep them clean and hygienic. Vacuuming is another option.
Tip: Don’t let your tiles air dry as they tend to get spots. After mopping, dry the floor using a clean towel.
2. Don’t let stains get comfortable.
You should act immediately if you see oil stains or any other stain. If you don’t remove the stains immediately, you might have to live with it. Residents can have a difficult time dealing with stubborn stains, especially on walls and floors.
Tip: It is easy to remove stains if you do it quickly. However, if the stains are difficult to remove, avoid using harsh chemicals and metal brushes. Instead, seek expert help.
3. Use vinegar as a cleaning agent.
Vinegar is a multi-purpose item in the kitchen. It is used as a cleaning agent and a cooking component.
Try this vinegar cleaner DIY for your tiles. Mix 1/2 cup white vinegar with a bucket full of water. Dip your mop into the solution and wring out the excess. Then, start cleaning by moving backward and forwards. Vinegar is a natural cleaner that not only removes stains but also makes your tiles shine. Vinegar can also be used as a disinfectant.
Tip: The acidity of vinegar ranges between 2 and 3. It may not be suitable to use on certain tiles, such as marble or natural stone.
4. Try cleaning using baking soda.
Add 1:1 baking soda and vinegar to a bucket full of warm water. Add a tablespoon of liquid dishwashing detergent and mix. Add essential oils to the solution for a nice fragrance. Dip the mop into the solution, and then swab it on the floor. For stubborn stains, you will need to scrub the floor vigorously. To dry the floor, use a clean, dry cloth.
Tip: Avoid using hard brushes and scrubbing products on your tiles. Use a soft brush or sponge instead. Make sure to remove all baking soda residues after cleaning the tiles.
5. Ammonia makes a good tile cleaner.
Ammonia can be used to clean tiles and remove mildew. Use a solution of a few drops of warm water to mop up the floor. Take a sponge and dip it in the liquid. Scrub the hard stains. Then, mop again with clear water. Then, dry the tiles using a clean, dry cloth.
Tip: Open windows and doors to allow air circulation in the room when using ammonia. Wear gloves whenever you handle ammonia.
6. Remove the grout.
If you neglect the grout, your tile cleaning will be incomplete. The tiles will also look better when the grout is clean. Try a DIY solution to clean tile grout instead of using harmful cleaners. For tile grout, a paste made of hydrogen peroxide and baking soda or a mixture of the two works well. Scrub the grout with a soft toothbrush.
Tip: Use a grout sealer after installation to protect and maintain the tiles. It is important to check the sealant at least twice per year. However, you should consult an expert first.
7. Learn your tiles and the best way to clean them.
Even if you use homemade ingredients, it is best to consult an expert before attempting any type of cleaning on your tiles.
Marble floors, for example, require special care. Lemon or vinegar should not be used on marble tiles as they can cause etching. Do not use harsh chemicals or brushes with coarse bristles to clean marble. Use phosphate-free detergent or a neutral pH non-abrasive to make a DIY cleaner. Pour the solution into a spray bottle and spray it on the tiles. Don’t let the marble remain wet. Remove the marble immediately with a dry cloth or mop.
Try mild soap and warm water for cleaning marble tiles or other natural stone tiles. Use only pH-neutral soap to avoid damaging your tiles.
The vinegar solution is best for porcelain tiles. Use the vinegar solution to clean at least once per month. To get the best results, use a broom to remove dust daily. Mop with water once a week.
Warm water mopping is a good option for ceramic tiles. All types of tiles, including ceramic, should be cleaned promptly to remove spills and stains. You will need to re-rinse the ceramic tiles with warm and clear water if you have used vinegar on them. After cleaning the floor, dry it with a mop.
Tiles have been installed to be used for a long time. Take good care of your tile cleaning in auckland and maintaining them regularly. These methods will keep your tiles clean and hygienic. It will also make your tiles look gleaming. However, remember to do a test first, as different tiles may require different cleaning methods.